Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
ENVIROMUX-IMDM
ENVIROMUX-IMDM

Adaptive Dual Microwave/PIR Motion Detector

NTI Part #: ENVIROMUX-IMDM
Environment Monitoring System Motion Detection Sensors
Motion/Intrusion Sensors compatible with ENVIROMUX-2D, ENVIROMUX-5D and ENVIROMUX-16D
  • Registers movement in area covered: 30x35 ft (9.1x10.6 m)
  • Dual technology microwave and PIR signal verification – combines the strengths of both heat- and motion-sensitive detection technologies to dually verify alarm conditions for ideal false alarm discrimination.
  • Condition display and setting feedback via LEDs.
  • Provides immunity from variation in ambient temperature, acoustic noise, EMI/RFI interference, and pets/animals.
  • 12 sensitivity modes - automatically adjusts to the environment.
  • Mounting: Wall or corner, 6 to 10 feet (1.8 to 3 meters).
  • Tamper switch opens when cover is removed.
  • Screw terminal.
    • Connect to digital input or RJ45 sensor ports on an ENVIROMUX system.
      • To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal.
      • To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
  • Operating temperature: 14 to 122°F (-10 to 50°C).
  • Dimensions WxDxH (in): 2.5x1.9x3.3 (64x48x84 mm).
  • Current consumption: 35mA @ 12VDC (max)
  • Powered by ENVIROMUX-2D/5D/16D.
  • TAA compliant.
  • Regulatory approvals: cULus