HDTV Matrix Switch, Video Router HDTV Routing Switch, HDTV video switcher

HDTV Audio/Video Matrix Switch

NTI Part #: SM-8X4-HDA-Group
VEEMUX® SM-8X4-HDA (Front & Back)
VEEMUX® SM-8X4-HDA (Front & Back)
NTI Part #: SM-8X4-HDA-Group
The VEEMUX® SM-8X4-HDA is a versatile multi-input A/V matrix switch that independently switches eight sets of YPbPr component video and analog/digital audio signals to any or all of the four outputs.
Also known as: HDTV audio / video matrix switch, video router, routing switcher, video switch, video port router, matrix switch, audio/video switch, video matrices
  • Designed and Manufactured in the U.S.A.
  • HDTV Audio/Video Matrix SwitchDigital Signage Product
Scroll Down to Get Quote
The VEEMUX® SM-8X4-HDA is a versatile multi-input audio/video matrix switch that independently switches eight sets of YPbPr component video and analog/digital audio signals to any or all of the four outputs. Each input and output has YPbPr component video, L/R analog audio (balanced/unbalanced), and digital audio on coax (S/PDIF).
  • Supports High Definition and Standard Definition YPbPr component component video, S-Video or composite video.
  • Audio can be unbalanced analog stereo, balanced analog stereo or digital S/PDIF.
    • Supports S/PDIF, DTS Digital Surround™, and Dolby Digital™ 5.1 digital signals.
  • Supports 480i (interlaced), 480p (progressive), 720i, 720p, 1080i, and 1080p formats.
  • Features break-away audio-allows audio to be switched independent of video.
  • Equipped with volume control: -80dB to 10dB, in 1dB steps.
  • Control the switch through Ethernet, RS232 or front panel buttons.
  • The SM-8X4-HDA is the ideal solution for many applications, such as digital signage, mission critical command centers, sports facilities and entertainment venues.
Video
  • BNC connectors.
  • Signal type: HDTV YPbPr component, S-Video, composite
    • Inputs and outputs must be of the same format.
  • Maximum input/output levels: 2Vp-p.
  • Input/output impedance: 75 Ohms
  • Video crosstalk: <-60dB
  • Video gain: unity
  • Bandwidth:>150 MHz, fully loaded
  • Resolutions: HDTV 480i, 480p, 720i, 720p, 1080i, and 1080p.
Stereo Audio
  • Screw terminal connectors.
  • Signal type: balanced stereo audio, unbalanced stereo audio, analog, left/right
    • Inputs and outputs must be of the same format.
  • Maximum input/output levels: 2.5Vp-p.
  • Input impedance: 10K Ohms
  • Output impedance: 50 Ohms
  • Frequency Response: +/-0.05 dB, 20 Hz to 20 kHz.
  • Total Harmonic Distortion + Noise (THD+N): 0.03% at 1 kHz.
  • Signal-to-Noise Ratio (SNR): >80 dBA
  • Stereo Channel Separation: <-90 dBA
  • Output gain: -80dB to 10dB
Digital Audio
  • BNC connectors
  • Signal type: S/PDIF, DTS Digital Surround™, Dolby Digital™ 5.1
    • Inputs and outputs must be of the same format.
  • Maximum input/output levels: 1Vp-p (unbalanced).
  • Input/output impedance: 75 Ohms
Power
  • 110 or 220 at 50 or 60 Hz via IEC connector.
Dimensions
  • WxDxH: 19x10x3.5 in (483x254x89 mm)
Environmental
  • Operating temperature: 32 to 100°F (0 to 38°C).
  • Storage temperature: -20 to 140°F (-30 to 60°C).
  • Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Regulatory Approvals
  • CE, RoHS
Warranty
  • Two years
Front Panel Interface
  • Configuration and control can be done using the front panel buttons.
  • Liquid Crystal Display (LCD) displays all current connections.
  • Locally change input and output selections with front panel buttons.
Ethernet Control
  • Configuration and control can be done over the Internet via Web Server and Telnet.
  • RJ45 connector with LEDs
  • 10/100Base-T Ethernet interface
  • Supported protocols: HTTP, HTTPS, Telnet
RS232 Control
  • Configuration and control can be done through the serial port.
  • Control the switch using the NTI Switch Control Program with Graphic User Interface via RS232.
  • Female 9-pin D connector.
  • Baud rate selectable from 1200, 2400, 4800, 9600.
  • Supports Tx, Rx; RTS wired to CTS; DTR wired to DSR and CD

Application Notes

  • HDTV Audio/Video Matrix Switch
    HDTV Audio/Video Matrix Switch

CAD Drawings

  • SM-8X4-HDA
    Loading image...
User Manual:
Data Sheet:
Knowledge Base:
Firmware:

  • "The SM-8x4-HDA switch is working out great for us. We have not entered the Hi-Def world yet, but we will have the switching tools when we do. In the mean time, the beauty of this switch is, it works great for regular old analog video and audio signals. I am using extremely sensitive boundary microphones in each of our classrooms. I take the amplified signal from each of these microphones and run them through the analog half of our switch. I take the analog video signals from our DVRs along with the video signals from our Axis PTZ classroom cameras and run them back through the switch in our control room. I can marry up the audio signal from any classroom with the video from any classroom and then record the combined output on DVD. We have been recording live venues such as 4H meetings, Master Gardening classes, and Homeland Security Meetings. The flexibility this switch gives us to capture any combination of video and audio from our classrooms has really paid off for us. That’s why I’m ordering another switch."

    Don Emerson
    University of Nevada, Cooperative Extension
    Las Vegas, NV, USA

(0)HDTV Audio/Video Matrix Switch

NTI Part # Inputs Outputs Rack Units Dimensions WxDxH (in.) Qty
SM-8X4-HDA 8 4 2RU 19x10x3.5
Top Please enter a quantity of at least one product
  • Techorium Computing
    • 200 Cochrane Drive, Unit 4,
    • Markham, ON, L3R 8E8, Canada
  • Telephone: (877) 307-4499
  • Fax: (905) 907-4775

Contact Us

© 2013 Network Technologies Inc. All Rights Reserved