Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
ENVIROMUX-DCLM-6
ENVIROMUX-DCLM-6

DC Line Monitor

NTI Part #: ENVIROMUX-DCLM-6
The DC Line Monitor measures DC voltage and reports DC current measured with attached Hall-Effect transducers (sold separately) to the ENVIROMUX-2D/5D/16D unit.
The DC Line Monitor measures DC voltage and reports DC current measured with attached Hall-Effect transducers (sold separately) to the ENVIROMUX-2D/5D/16D unit.
  • Reports DC voltage and DC current.
  • Six 2-pin terminal blocks for measuring DC voltage
    • Non-isolated -60 to +60V DC
    • 0.12VDC resolution
    • 1.2VDC accuracy
  • Six non-rectifying Hall Effect 4-pin transducer interfaces for measuring DC current
    • 0.2% resolution
    • Accuracy and range are transducer-dependent (sold separately).
  • Current consumption: 8mA @ 5VDC, 66mA @ 12VDC.
  • Supports CAT5/5e/6 cable up to 1,000 ft (305 m) (18-24 AWG).
  • Powered by ENVIROMUX-2D/5D/16D.
    • The ENVIROMUX-DCLM-6 may require more power than the RJ45 sensor ports can supply on the ENVIROMUX-2D/15D/16D.
      • Refer to page 2 of the manual to determine if the optional PWR-SPLY-12V1A power supply is necessary for your configuration.
  • Dimensions WxDxH (in): 6.82x3x1.71" (173x76x43 mm).
  • Regulatory approvals: CE, RoHS.
  • Compatible with ENVIROMUX-FSC Fiber Converter/Extender.
    • Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit.