Video Input

• Signal format: Composite, S-Video, YpbPr, RGBHV, RGsB, DVI
• Resolutions: 1080p, 1080i, 720p, 576i, 576p, 480i, 480p, VGA, SVGA, XGA, SXGA, UXGA, WVGA, WXGA, WUXGA (narrow band sync), user programmable resolutions.
• Connectors:
  • SPLITMUX-SVDVI-2L:
    • One female 4-pin miniDIN S-Video connector (Can be used as composite input with supplied RCA adapter.)
    • One female DVI-I connector (DVI and RGBHV/YPbPr). Analog input requires optional breakout cable.
      • If a DVI-I breakout cable is used, RGBHV/YPbPr can be connected as an additional input to the DVI. (3 possible inputs)
  • SPLITMUX-SVDVI-2:
    • One female 4-pin miniDIN S-Video connector (Can be used as composite input with supplied RCA adapter.)
    • One female DVI-I connector (DVI and RGBHV/YPbPr). Analog input requires optional breakout cable.
      • If a DVI-I breakout cable is used, RGBHV/YPbPr can be connected as an additional input to the DVI. (3 possible inputs)
  • SPLITMUX-SVDVI-4:
    • Two female 4-pin miniDIN S-Video connectors (Can be used as composite input with supplied RCA adapter.)
    • Two female DVI-I connectors (DVI and RGBHV/YPbPr). Analog input requires optional breakout cable.
      • If DVI-I breakout cables are used, RGBHV/YPbPr can be connected as two additional inputs to the DVI. (6 possible inputs)

Audio (SPLITMUX-SVDVI-4 Only)

• Connectors: Female 8-pin miniDIN connector for use with supplied audio breakout cable.
• Audio breakout cable includes 2 sets (R&L) of RCA inputs and one set (R&L) of RCA output.
• Audio signals are compensated for propagation delay for correct sync with video.
• Input/output: Unbalanced stereo line level and 48KHz digital.

Video Output

• Signal format: DVI, RGBHV, RGsB, and YpbPr.
• Resolutions: 1080p, 720p, 576p, 480p, VGA, SVGA, XGA, SXGA, UXGA, WVGA, WXGA, WUXGA (narrow band sync), user programmable resolutions.
• Connectors:
  • One female DVI-I connector (DVI and RGBHV/YPbPr). Analog output requires optional breakout cable.
    • If a DVI-I breakout cable is used, RGBHV/YPbPr can be connected as an additional output to the DVI.
• Bandwidth: 165MHz

Power

• 110 or 220 VAC at 50 or 60 Hz via AC adapter.

Dimensions

• WxDxH (in): 8.4x5.7x1
  WxDxH (mm): 213x144x25

Package Includes

• SPLITMUX Screen Splitter.
• Power supply.
• IR remote control.
• SPLITMUX-SVDVI-2L, SPLITMUX-SVDVI-2:
  • One S-Video to Composite Video Adapter Cable - one male 4-pin miniDIN connector to three RCA jacks.
  • One RS232 adapter cable - one male 6-pin miniDIN connector to one male DB9 connector.
• SPLITMUX-SVDVI-4:
  • One S-Video to Composite Video Adapter Cable - one male 4-pin miniDIN connector to three RCA jacks.
  • One RS232 adapter cable - one male 6-pin miniDIN connector to one male DB9 connector.
  • One Audio Breakout cable - one male 4-pin miniDIN connector to eight RCA jacks.
• User manual.

Regulatory Approvals

• FCC

Warranty

• 2 years

Dual Mode

• In dual mode, the screen is split into two fields of equal size, each displaying the entire contents of two video sources.

Tri Mode (SPLITMUX-SVDVI-4 Only)

• In tri mode, the screen is split into three fields of equal size, each displaying the entire contents of three video sources.

Quad Mode (SPLITMUX-SVDVI-4 Only)

• In quad mode, the screen is split into four fields of equal size, each displaying the entire contents of four video sources. Quad mode cannot be rotated.

Full Screen Mode

• In full screen mode, one of the video sources is displayed in full screen size and maximum resolution.

Picture in Picture (PIP) Mode

• In PIP mode, the full screen display of one of the video sources is accompanied by a small image (thumbnail) of another video source allowing simultaneous monitoring.
• Translucent overlays maximize main image size while still seeing PiP

Video Wall Mode

• Connect multiple units to create a video wall.
  • A SPLITMUX-SVDVI-x is required for each connected display within a video wall.
    • Use SPLITMUX-LOOP-KIT to loop multiple units together for a single point of control.
  • Depending on input and output resolutions, video walls up to 32x32 can be created.
  • SPLITMUX-SVDVI-2L can only create video walls with screens in horizontal position.

Front Panel Interface

• Use front panel buttons to locally change ports or to select a display mode.

RS232

• Configuration and control can be done through the serial port.
• Female 6-pin miniDIN (DB9 adapter included.)
• Baud rate: 2400 through 115200 bps

IR Remote Control

• Configuration and control can be done using the IR remote control.
• The remote is addressable for installing with multiple units.

On Screen Display (OSD)

• Select display modes and video sources with On Screen Display (OSD).
• Use the front panel buttons or IR remote control to operate the OSD.
• OSD controls for OSD position, dual mode, tri mode, quad mode, PIP mode, brightness, contrast, phase, Horz- and Vert-center alignment adjustment and image rotation.