ENVIROMUX-M-DCS
 |
ENVIROMUX-VSS
 Wiring Instructions (PDF)
|
- Monitors access with a magnetic bridge sensor, which responds to any magnetic material (no special inserts necessary).
- Can also be used for monitoring side wall and covers.
- Includes mounting hardware.
- For normally closed circuit connection.
- 2-wire interface.
- Screw terminal.
- Maximum cable length: 1,000 feet (305 meters)
- Wide actuating gap, approximately 25 mm.
-
Dimensions WxDxH (in): 0.5x0.5x2 (Switch), 0.5x0.5x2 (Magnet).
Dimensions WxDxH (mm): 12.7x12.7x50.8 (Switch), 12.7x12.7x50.8 (Magnet).
- Regulatory approvals: RoHS
|
- For registering movement and shocks.
- Adjustable sensitivity.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 feet (305 meters)
- Regulatory approvals: RoHS
|
ENVIROMUX-GBS | 
ENVIROMUX-IMD
|
- Acoustically detects the cracking of glass.
- Adjustable sensitivity.
- Includes mounting hardware.
- Connect to RJ45 or digital input sensor ports.
- Supports CAT5/5e/6 UTP or STP cables.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 feet (305 meters)
- Powered by ENVIROMUX-SEMS-16.
|
- Registers movement in the area covered.
- Condition display via LED.
- Provides immunity from common-mode signals such as the effect of strong hot or cold air currents, variation in ambient temperature, background radiation and acoustic noise.
- 24 dual-element detection zones for long, mid and short range protections.
- Surface or corner mounting
- Pulse count or single shot triggering.
- Good RFI protection.
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 feet (305 meters)
- Powered by ENVIROMUX-SEMS-16.
- Regulatory approvals: CE, RoHS
|
ENVIROMUX-ACK
| 
ENVIROMUX-IMD-CM
|
- Two relay outputs controlled by two groups of independent user codes.
- Output 1: 5 Amp relay for door strike
- Output 2: 1 Amp relay for other control applications.
- Normally closed and normally open dry contacts for both output relays.
- LED indicators for operation status and system status.
- Terminal block for all external connections.
- Single lock or inter-lock operation.
- Operate with fail-safe or fail-secure locking device.
- Door open announcer.
- Non-volatile memory in case of power failure.
- Powered by ENVIROMUX-SEMS-16.
- Regulatory approvals: CE, RoHS
|
- Detects movement across the detection field.
- 360° detection pattern.
- 113° conical detection angle from ceiling.
-
36 feet diameter protection when mounted 12 feet high.
11 meter diameter protection when mounted 3.7 meter high.
- Provides substantial immunity to false alarms caused by environmental disturbances.
- Pulse count or single shot triggering.
- Good RFI protection
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 feet (305 meters)
- Powered by ENVIROMUX-SEMS-16.
- Regulatory approvals: CE, RoHS
|
ENVIROMUX-EDR-SCR
ENVIROMUX-EDR-SF |
ENVIROMUX-IMD-MW
|
- Combine with ENVIROMUX-ACK, access control digital keypad, to convert a standard cylindrical lock set to an electronic access control locking system with high security and user convenience without a key.
- Fail-Safe Electric Strike (ENVIROMUX-EDR-SF)
- The door is locked with power ON, and unlocked with power OFF.
- For Fire/Emergency door or Escape door installations.
- Fail-Secure Electric Strike (ENVIROMUX-EDR-SCR)
- The door is locked with power OFF, and unlocked with power ON.
- For Entrance door installation.
- Powered by ENVIROMUX-SEMS-16.
- Regulatory approvals: CE
|
- Detects movement across the detection field.
- Provides substantial immunity to false alarms caused by environmental disturbances.
- Pulse count or single shot triggering.
- Good RFI protection.
-
Dimensions WxDxH (in): 2.2x1.2x2.9
Dimensions WxDxH (mm): 56x31x74
- Screw terminal
- To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
- Maximum cable length: 1,000 feet (305 meters)
- Powered by ENVIROMUX-SEMS-16.
- Regulatory approvals: CE, RoHS
|
ENVIROMUX-RKS
| 
ENVIROMUX-EBS
|
- Remote key station designed for security system ON-OFF control applications.
- Built with universal connection terminals; can be used freely with most security systems.
- Provides momentary contact with spring return.
- Standard single gang mounting box.
- Built-in tamper switch.
- Built-in connection terminals.
- For security system and door strike applications.
-
Dimensions WxDxH (in): 1.7x 2.9x4.6
Dimensions WxDxH (mm): 43x74x117
- Powered by ENVIROMUX-SEMS-16.
- Regulatory approvals: RoHS
|
- Sends activation signal when button is pressed.
- For normally closed or normally open circuit connections.
- 2-wire interface.
- Screw terminal.
- Maximum cable length: 1,000 feet (305 meters)
-
Dimensions WxDxH (in): 0.4x0.9x3
Dimensions WxDxH (mm): 10x23x76
- Regulatory approvals: RoHS
|
ENVIROMUX-LIS
|
ENVIROMUX-S420MA |
- Detects and measures the luminous intensity of light.
- Ideal for monitoring unmanned closets, telecom rooms, remote data rooms, or other low traffic facilities.
- Applications from 0 to 128,000 lux.
- Human eye response (540nm peak sensitivity).
- IR and UV rejection
- RJ45 connector.
-
Supports CAT5/5e/6 cable up to 1,000 feet (not included). Supports CAT5/5e/6 cable up to 305 meters (not included).
- Powered by ENVIROMUX-SEMS-16.
- Regulatory approvals: CE, RoHS
- Compatible with ENVIROMUX-SEMS-16.
|
- External RJ45 device monitors up to two 4-20mA analog sensors
- Supports ISA Type 2, ISA Type 3, and ISA Type 4 sensors
- Provides 18VDC, 25mA for each sensor
- Connector: Screw Terminal, 8-position.
Supports CAT5/5e/6 cable up to 1,000 feet (not included).
Supports CAT5/5e/6 cable up to 305 meters (not included). - Includes Mounting Hardware
- Powered by ENVIROMUX-SEMS-16.
- Regulatory approvals: RoHS.
|
ENVIROMUX-MB-IMD |
ENVIROMUX-2W-xx
|
- Mounting bracket for installing the infrared motion sensors to a ceiling or wall.
- 360° Angle Adjustment
- For use with the ENVIROMUX-IMD, ENVIROMUX-IMD-CM, and ENVIROMUX-IMD-MW motion detectors.
|
- 2-wire sensor cable.
- Use to connect dry contact sensors to the
ENVIROMUX-SEMS-16.
-
Available lengths: 3/6/10/25/50/100 feet.
Available lengths: .9/1.8/3/7.6/15.2/30.5 meters.
- Regulatory approvals: RoHS, UL
|
