ENVIROMUX-ACVD-515
ENVIROMUX-ACVD-C14
 |
ENVIROMUX-S60VDC
|
- Measurement range: detects mains voltage from 50 to 250 VAC.
- Measurement indication: Alarm or Normal.
- Sensor type: open/closed contact switch.
- Includes 1.8 meter 2-wire cable to connect to the ENVIROMUX-SEMS-16.
- Attached 3 feet (0.9 meter) power cord.
- ENVIROMUX-ACVD-515: Standard US 120V 15A NEMA 5-15 plug
- ENVIROMUX-ACVD-C14: Universal 250V IEC C14 socket
- Regulatory approvals: CE, RoHS
|
- Monitors up to two DC voltages: -60VDC ~ 0VDC or 0VDC ~ 60VDC
- Connector: Screw Terminal, 5-position
Supports CAT5/5e/6 cable up to 1,000 feet (not included). Supports CAT5/5e/6 cable up to 305 meters (not included).
- Includes Mounting Hardware
- Regulatory approvals: CE, RoHS
|
ENVIROMUX-ACLM-P12
ENVIROMUX-ACLM-P8
|
ENVIROMUX-ACLM-V
|
- Reports AC Voltage, Frequency, Power, and Current.
- Monitors Power from one AC inlet to one AC outlet, between 50~250VAC and 47~63Hz.
- Monitors the number of swells, sags, and spikes.
- Includes Relay with configurable disconnect settings: threshold reboot, or manual reboot.
- Outlet Max load rating:
- ENVIROMUX-ACLM-P12 (US/Canada):
12A rated load, 15A maximum.
- ENVIROMUX-ACLM-P8 (Euro/UK):
8A rated load, 10A maximum.
- Capable of measuring current surges to 60A.
- User defined minimum and maximum voltage and power thresholds.
- Capable of detecting user selected spike events with a peak greater than 50V, 250V, 500V, or 1KV.
Supports CAT5/5e/6 cable up to 1,000 feet (not included). Supports CAT5/5e/6 cable up to 305 meters (not included).
- Regulatory approvals: CE, RoHS
|
- Reports AC Voltage and Frequency.
- Monitors AC voltage and frequency on two AC inlets between 50~250VAC and 47~63Hz.
- Monitors the number of swells, sags, and spikes.
- User defined minimum and maximum voltage thresholds.
- Capable of detecting user selected spike events with a peak greater than 50V, 250V, 500V, or 1KV.
Supports CAT5/5e/6 cable up to 1,000 feet (not included). Supports CAT5/5e/6 cable up to 305 meters (not included).
- Regulatory approvals: CE, RoHS
|
ENVIROMUX-PT1M-208-0800
ENVIROMUX-PT3M-208-0800
ENVIROMUX-PT3S-480-0100
 Application Note: 3-Phase Power
Transducer Application
|
ENVIROMUX-S420MA
|
- Monitors and reports kW real power of any 3 phase circuit, such as the power a building consumes.
- Split-core design allows installation of CT without disconnecting conductor.
- Color coded CT and voltage leads.
- Smart electronics in sensors automatically detect phase reversal.
- Input primary voltage: 208/240 or 480 VAC RMS
- Number of phases monitored: one or three
- Balanced Loads: one CT model (assumes single reading represents all phase currents)
- Unbalanced Loads: three CT model, one black, red, and yellow.
- Frequency: 50/60Hz
- Maximum primary current: Up to 2400 amps continuous per phase
- Accuracy: +/- 1%
- Output: 4-20mA
- Supply power (current loop): 9-30VDC; 30mA max.
- Requires the ENVIROMUX-S420MA to operate.
- Caution: sensors tie directly into the line; should be used only by qualified personnel.
| ENVIROMUX-PT1M-208-0800 |
208/240 |
800 |
Single Medium |
| ENVIROMUX-PT3M-208-0800 |
208/240 |
800 |
Three Medium |
| ENVIROMUX-PT3S-480-0100 |
480 |
100 |
Three Small |
NOTE: Contact an NTI Product Consultant for other available models. |
- External RJ45 device monitors up to two 4-20mA analog sensors
- Supports ISA Type 2, ISA Type 3, and ISA Type 4 sensors.
- Resolution: 100mA
- Accuracy: 0.5% of full scale
- Provides 18VDC, 25mA for each sensor
- Connector: Screw Terminal, 8-position.
Supports CAT5/5e/6 cable up to 1,000 feet (not included). Supports CAT5/5e/6 cable up to 305 meters (not included).
- Includes Mounting Hardware
- Powered by ENVIROMUX-SEMS-16.
- Regulatory approvals: CE, RoHS.
- Compatible with ENVIROMUX-SEMS-16 only.
|
ENVIROMUX-PWR-RLY-15A
ENVIROMUX-PWR-RLY-20A
 | 
ENVIROMUX-2W-xx
|
|
|
|
