Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
Fiber Converter/Extender
Fiber Converter/Extender

Fiber Converter/Extender

NTI Part #: ENVIROMUX-FSC
Extends sensor up to 1.2 miles (2 km) over two fiber cables.
  • Extends sensor up to 1.2 miles (2 km) over two fiber cables.
  • Converts RJ45 cabling into fiber on both ends.
  • Built-in surge and static protection.
  • Supports two simplex multimode 50-micron or 62.5-micron SC cables.
    • Use CAT5/5e/6 cable with one end unterminated to connect the ENVIROMUX unit and sensor to the fiber converters.
      • Supports CAT5/5e/6 cable up to 1,000 ft (305 m) on local and remote ends combined.
  • Connectors (local/remote unit):
    • Two SC fiber connectors.
    • 8-position terminal block.
    • 2-way terminal block for power.
  • Includes two RS485 to Fiber Converters, 5VDC, 9VDC, and 12VDC power supplies.
  • Dimensions (WxDxH) in: 4.65x3.58x0.87 (118x91x22 mm).
  • Operating temperature: -40 to 185°F (-40 to 85°C).
  • Operating humidity: 5 to 95% non-condensing RH.
  • Compatible with ENVIROMUX-2D/5D/16D and ENVIROMUX-SEMS-16(U).
  • Regulatory approvals: CE, FCC, RoHS.

Application Notes

  • Extend Sensors Up to 1.2 miles Away From ENVIROMUX-2D/5D/16D
    Extend Sensors Up to 1.2 miles Away From ENVIROMUX-2D/5D/16D
    The ENVIROMUX-FSC converts RJ45 cabling into fiber, enabling a sensor to be located up to 1.2 miles (2 km) away from the ENVIROMUX-2D/5D/16D unit. Furthermore, between the ENVIROMUX unit and fiber converter, and between the fiber converter and sensor combined, up to 1,000 ft (328 m) of CAT5/5e/6 cable can be used to extend the distance further. Note: by using the Digital I/O Expanders or Temperature/Humidity Sensor with Two Digital Inputs at the remote end, additional sensors can be connected.