Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch

Low-Cost HDMI Dual Screen Splitter/Multiviewer

NTI Part #: SPLITMUX-HD-2LC
SPLITMUX-HD-2LC (Front & Back)
SPLITMUX-HD-2LC (Front & Back)
NTI Part #: SPLITMUX-HD-2LC
Display real-time 1080p video from two HDMI/DVI sources simultaneously on a single display

The SPLITMUX® Low-Cost HDMI Dual Screen Splitter/Multiviewer allows you to simultaneously display real-time HDMI/DVI video from two different sources on a single monitor. It is capable of displaying the video sources in dual, PiP or full screen mode.

  • Dual, Picture in Picture, and Full Screen display modes.
  • Supported resolutions:
    • Inputs: HTDV resolutions to 1080p and computer resolutions to 1920x1200.
    • Output: 1080p, 1080i, 720p, 1024x768, 1360x768.
  • Independent video in to video out resolution.
  • HDMI features supported:
    • Inputs: 24-, 30-, and 36-bit xvYCC, sRGB, and YCbCr.
    • Outputs: 24- and 30-bit sRGB.
    • Two-channel non-mixing stereo with PCM2, 5.1, 7.1 channels, Dolby 5.1, and DTS 5.1 audio.
    • Bandwidth up to 225 MHz (6.75 Gbps).
      • Inputs: 2.25 Gbps
      • Output: 2.0625 Gbps
  • Fluid real-time video performance with 60 frames per second (fps).
  • Switch audio independently of video from connected HDMI sources in Dual mode.
  • Any DVI source or display can be connected by using the DVI-HD-xx-MM cable (not included).
    • Use DVIA-HD-CNVTR-LC or DVI-HD-CNVTR DVI + Audio to HDMI Converters to pass and independently switch audio signals to the multiviewer.
  • Use the front panel buttons to locally change ports, select a display mode, or change resolutions.
  • Built-in default EDID table.
Note: this device does not support HDCP.