Control

• Female DB9 connector.
• Baud rate 300 through 9600, DIP switch selectable.
• Use DIP switches to address up to 15 units, all of which can be daisy chained and controlled by one serial port.
• Seven segment displays show what input is connected to each output.
• Download RS232 protocol manual 

Commands

• RS - causes switch to reset so that IN1 connects to OUT1, IN2 connects to OUT2, etc.
• CS - Causes one INx/OUTx connection to occur.
• CA - causes all inputs to connect to specified output.
• RO - reads what input is connected to specified output.
• RU - Reads size of matrix, reports number of inputs and number of outputs on specified switch.

• Select computers by name with On-Screen Display (OSD). Not available on the 2-port switch.
• Use keyboard or mouse to operate the switch from menus superimposed onto your monitor.
• Type <CONTROL> + <`> to activate OSD.
• Control, Scan, and Broadcast functions.
• View vital port information.
• Search for ports by name.
• Search Mode lets the user type in the first few letters of the computer's name and the OSD will locate it.
• Names can be up to 12 characters long.
• View names of computers on cascaded switches up to 128 ports.
• Modify the size and position of the On-Screen Display.
• Help Screens assist users with the OSD.
• OS and software independent.
• OSD comes built into the switch — no need to install additional hardware or software.

• Advanced security included with switch.
• Each user password & name can be up to 15 characters long, and each switch can store up to 63 users.
• Administrator can enable or disable all security features and select which computers each user can access.

• Once security is enabled, a user or administrator must "login" in order to access any of the computers connected to the switch.

• All PS/2 KVM switches are available in a rackmount enclosure.
• Add "-R" to Part # for rack mounted in a 19" metal case.
  Add "-R" to Part # for rack mounted in a 483 mm metal case.