Environment Monitoring System IP Temp CAT5 Video Extender HDMI VGA DVI KVM Switch, Video Splitter, Video Matrix Switch
ENVIROMUX-ULT
ENVIROMUX-ULT

Additional Images

Ultrasonic Level Transmitter

NTI Part #: ENVIROMUX-ULT
For small tanks 49.2 in. or less. Enables flexible design applications for system integration or retrofit of floats, conductance and pressure sensors.
  • General purpose, non-contact ultrasonic level transmitter provides real-time monitoring of fluid levels
    • Updates readings at a minimum rate of 1 second intervals.
  • Compact sensor with 2" (51 mm) dead band and beam width optimized for small tanks 49" (1,245 mm) or less.
  • Provides two-wire 4-20 mA analog output.
  • Includes Fob USB interface tool for configuring the transmitter.
  • Ideal for fluid handling and chemical feed applications integrating process or control automation of small tanks mounted on tools, skids or machines.
  • Requires the ENVIROMUX-S420MA-24V to operate with ENVIROMUX-2D/5D/16D.
    • Maximum cable length: 1000 ft (305m).
    • • Powered by ENVIROMUX-2D/5D/16D.
  • Regulatory approvals: CE, cFMus
  • Compatible with ENVIROMUX-FSC Fiber Converter/Extender.
    • Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.

Application Notes

  • Connect an ENVIROMUX-ULT to an ENVIROMUX-2D/5D/16D
    Connect an ENVIROMUX-ULT to an ENVIROMUX-2D/5D/16D
    ENVIROMUX-ULT is a general purpose non-contact ultrasonic level transmitter for small tanks 49.2" (1.25 m) or less. ENVIROMUX-ULT enables flexible design applications for system integration or retrofit of floats, conductance and pressure sensors. The ENVIROMUX-ULT is well-suited for fluid handling and chemical feed applications integrating process or control automation of small tanks mounted on tools, skids or machines. The rugged PVDF enclosure is ideal for a wide range of corrosive, waste or slurry type media, and can be broadly selected for atmospheric day tank, process vessel or dispenser, pump lift station and waste sump applications. Level indication can be monitored using a local display or controlled through a PLC.

    When connected to an ENVIROMUX-S420MA-24V Sensor Converter using 2-wire cable, the ENVIROMUX-ULT will send fluid level status information to an ENVIROMUX-2D/5D/16D up to 1000 feet away from the ENVIROMUX-S420MA-24V. The fluid level can be monitored remotely by connecting to the ENVIROMUX-2D/5D/16D through an Ethernet connection. Additionally, the ENVIROMUX-2D/5D/16D can be configured to send alerts via email, SMS, SNMP, and syslog when fluid levels reach configurable values.